Saturday, September 10, 2016

Peel Ply and Bonding Surface Preparation



How a peel ply releases from the composite substrate to be bonded controls the surface quality and thus bond performance. Fracture between (blue arrow) the matrix resin of the impregnated “wet peel ply” and that of the composite substrate produces the best results. 
SOURCE: “Evaluation of Peel-ply Materials on Composite Bond Quality”, Univ. of Washington and The Boeing Co.



There is a very informative post about peel ply and bonding on the Composites World Blog.  A lot of good information about the subtleties of surface preparation.

7 comments:

  1. Good to see your posting again. I was already asking myself, how the construction was going on. I'm looking forward so see such a fine boat on the water.

    ReplyDelete
  2. This comment has been removed by the author.

    ReplyDelete
  3. how is it going? wondering why we never hear from you.

    ReplyDelete
  4. Jak? how is this boat coming along. I hope that you are well and everything is OK.

    ReplyDelete
  5. So what happened? Have you finished yet. I hope you are sailing this boat now.

    ReplyDelete